Cisco compatible (GLC-BX-D-80KM, GLC-BX-U80), 1.25G, BiDi SFP, TX1550nm / RX1490nm, 80KM Transceiver, LC Connector for SMF with DDMI | PlusOptic BISFP-D2-80-CIS
SKU: BISFP-D2-80-CIS

Cisco compatible (GLC-BX-D-80KM, GLC-BX-U80), 1.25G, BiDi SFP, TX1550nm / RX1490nm, 80KM Transceiver, LC Connector for SMF with DDMI | PlusOptic BISFP-D2-80-CIS

$128.70 $117.00
$128.70 $117.00
In stock
Cisco compatible BiDi SFP 1.25G Transceiver for SMF with a reach of 80KM. Fully compliant with Cisco GLC-BX-D-80KM, GLC-BX-U80
or
Curbside Pickup

In stock

SKU
BISFP-D2-80-CIS

Cisco compatible  (GLC-BX-D-80KM, GLC-BX-U80), 1.25G, BiDi SFP, TX1550nm / RX1490nm, 80KM Transceiver, LC Connector for SMF with DDMI | PlusOptic BISFP-D2-80-CIS

PLUSOPTIC’s BiSFP-UI-20-PLUI Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1550nm DFB laser) and the PIN photo-detector. The module data link up to 20KM in 9/125um single mode fiber.

The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.

FEATURES

  •  Supports 1.25Gbps/1.0625Gbps bit rates
  • Bi-Directional LC connector
  • Hot pluggable SFP footprint
  • 1490nm DFB laser and 1550nm PIN photo detector
  • 1550nm DFB laser and 1490nm PIN photo detector
  • Applicable for 80Km SMF connection
  • Low power consumption, < 1.0W
  • Digital Diagnostic Monitor Interface
  • Compliant with SFP MSA and SFF-8472
  • Very low EMI and excellent ESD protection
  • Operating case temperature
    • Commerical: 0 to 70 °C

APPLICATIONS

  •  Gigabit Ethernet
  • Fiber Channel
  • Switch to Switch interface
  • Switched backplane applications
  • Router/Server interface
  • Other Optical Links

WARRANTY

3 - year limited warranty

WHY 4CABLING?

  • Australia’s leading importer & wholesaler of 19” server racks, copper, ethernet cable, fibre optic leads & structured networking products
  • ISO 9001, NSW Govt. & GITC (QLD Govt.) approved supplier
  • Secure online shopping 24/7
  • A loyal customer base of 100k+ who trust us for their data & electrical needs
  • Over 3000 quality products in stock ready to go
  • All products are approved as per local Australian standards
  • Warranty & peace of mind return policy
  • Lightning fast delivery nationwide
  • Expert advice
  • Proudly 100% Australian owned & operated

Specifications

More Information
SKU BISFP-D2-80-CIS
Brand PlusOptic
Manufacturer Part# BISFP-D2-80-CIS
GTIN 9350888033241
Compatible Brand Cisco
Device Type SFP+
Transmission Mode SMF
Length 25mm
Max Distance 80km
DDMI Yes
Max Data Rate 1.25Gbps
Terminations LC
Warranty 3 Years
Contact Information
Copyright © 2023 4Cabling Pty Ltd. All rights reserved.