- What's New
- Server Racks
- Cable Management
- Brackets & Stands
- Audio Visual
- Sale Hot!
Fluke's CableIQ is the first cabling bandwidth tester for network technicians. It gives even the most novice technician the capability to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable.
Plug into any cable, patch panel, or wall jack and see both the cable details - length/wiremap - and far-end device details (speed/duplex settings) at once. A series of both cable and network test functions give you the capability to isolate connectivity problems within your network. For instance, if Discover mode shows duplex settings are matched but the problem persists, run Autotest to see if the cabling can support the required bandwidth. If a link is not qualified, CableIQ can provide you with detailed information on the nature and location of cabling performance faults such as crosstalk or large impedance changes. Of course, in practical terms, this means network technicians can close trouble tickets faster, reduce on-call time, and importantly, save money by better utilizing their existing infrastructure.
When you deploy Voice over IP (VoIP) or Gigabit Ethernet, you want to make sure that the existing cabling will support the bandwidth requirements of your new equipment. Your cabling was certified, but moves adds and changes have rendered many links incapable of running desired speeds. CableIQ quickly reveals whether a link, including patch cords, is qualified for voice, 10/100BASE-T, VoIP, or Gig. Knowing your cabling's bandwidth capabilities before upgrading can prevent countless hours of future downtime and labor hours wasted on unnecessary troubleshooting.
Plug into any cable, patch panel, or wall jack and see both the cable details (length/wire map) and far-end device details (speed/duplex settings) at once. A series of both cable and network test functions help you isolate connectivity problems. For instance, if Discover mode shows duplex settings are matched but the problem persists, run Autotest to see if the cabling can support the required bandwidth. If a link is not qualified, CableIQ provides detailed information on the nature and location of cabling performance faults such as crosstalk or large impedance changes. With CableIQ your techs can close trouble tickets faster by cutting cable troubleshooting time in half.
Free up 10% or more of your switch ports
CableIQ's Discover mode shows you exactly what's at the far end of any cable. At the switch, test each cable one at a time. You can quickly see whether the cable is open at the far end, or is connected to a PC. Or use CableIQ's hub blink feature from the workstation to flash the corresponding switch port LED. You may be surprised at how many unused ports you can free up and redeploy using CableIQ.
Determine where installed cables are routed, all from one location.
INTELLIGENT WIRE MAP
Intelligent wire map tests for length, shorts, split pairs, or opens and displays with an intuitive graphical interface where a fault is located.
CableIQ's Intelligent Wire map shows pin 6 open at far end of tested cable (130 ft/34 meters).
Attach remote ID's in different locations, then perform multiple cable tests from the distribution center or wiring closet. CableIQ provides the wire map, pair lengths, distance to fault, and remote ID number of each tested cabling link.
Locate cables and wires with superior accuracy
CableIQ supports IntelliTone digital toning by:
EASY TO USE
Empower frontline techs with an easy-to-use-tool
Intuitive user interface and graphical display guides user with little or no training required.
1 year limited warranty.
Email [email protected] or phone 02 9565 4077 to talk with one of our expert advisers.