Premium Locally Manufactured Custom Fibre - Mini Loose Tube PE/Nylon

Mini Loose Tube PE/Nylon at 4Cabling

External Underground Loosetube Optical Cable for use in micro ducts

This loose tube dielectric optical cable is designed for external underground installations in (micro) ducts by pulling, blowing or floating techniques.

Polyamide provides anti-termite protection.

Optimised for blowing in mini ducts of 10mm diameter (internal). 

  • Available as Terminated or Unterminated
  • Manufactured in Australia and can be custom configured/ terminated in our local
    cleanroom
  • Designed for external underground installations in ducts or direct burial
  • Blue outer Nylon (Polyamide) provides anti-termite protection
  • Optimised for blowing in mini ducts of 10mm diameter (internal)
Mini Loose Tube Nylon RollMini Loose Tube Nylon Roll

Technical Data

Number of Fibres 2 to 72
Number of Elements 6
Tube/Filler Diameter 1.55mm
Cable Nominal Diameter 6.3mm
Cable Nominal Weight 33kg/km
Max. Installation Tension 1.0kN
Max. Crush Resistance 2.0kN/100mm
Min. Bending Radius (At Full Load) 130mm
Min. Bending Radius (At No Load) 65mm
Temperature Range -0 to +50°C
Mini Loose Tube Nylon Cross SectionMini Loose Tube Nylon Cross Section

Multi-loose tube construction

Single layer 2 to 72 fibres

Central strength member (CSM)

Glass fibre reinforced plastic material (GRP), with or without over-sheathing

Tube

Thermoplastic material, containing up to 12 optical fibres filled with a low viscosity, thixotropic, non-melting gel fully compatible with fibre coating and tube material

Stranding

The required numbers of elements (tubes and fillers) are SZ stranded around the central strength member

Longitudinal water tightness

Water swellable elements
(dry-core)

Sheath

UV stabilised polyethylene in compliance with AS 1049

Two ripcords provided beneath the sheath for easy removal

Outer jacket

UV stabilised polyamide (Nylon) in compliance with AS 1049 integrally bonded to PE sheath

Warranty

3 Years


Raw Fibre - Available SKUs

SKU DESCRIPTION INDICATIVE PRICE
PER METRE ex GST
 UT.L.6.OM3.MIN.LTN 6 Core OM3 Multimode Mini Loose Tube PE/Nylon $4.63
UT.L.6.OM4.MIN.LTN 6 Core OM4 Multimode Mini Loose Tube PE/Nylon $6.20
UT.L.12.OM3.MIN.LTN 12 Core OM3 Multimode Mini Loose Tube PE/Nylon $6.33
UT.L.12.OM4.MIN.LTN 12 Core OM4 Multimode Mini Loose Tube PE/Nylon $9.40
UT.L.12.OS2.MIN.LTN 12 Core OS2 Singlemode Mini Loose Tube PE/Nylon $3.43
UT.L.24.OM3.MIN.LTN 24 Core OM3 Multimode Mini Loose Tube PE/Nylon $9.83
UT.L.24.OS2.MIN.LTN 24 Core OS2 Singlemode Mini Loose Tube PE/Nylon $4.57
UT.L.48.OS2.MIN.LTN 48 Core OS2 Singlemode Mini Loose Tube PE/Nylon $5.61
UT.L.96.OS2.MIN.LTN 96 Core OS2 Singlemode Mini Loose Tube PE/Nylon $11.33


ADDITIONAL FEES: Assembly fee of $30 applies to each drum / Drum fees will be included on quote based on cable length.

 


4Cabling provides world-class Fibre Optic products

4Cabling's Fibre Optic Cables are the installers' choice Australia wide. Our fibre is manufactured to the highest grade with stringent quality guidelines. Every Fibre optic patch lead is 100% tested and comes with a test report. Don't risk the performance of your network or installation by installing cheap grade fibre. If you are looking for high-grade telecom grade fibre products 4Cabling will be your number one choice for your cabling solution. We also offer an onsite fibre termination facility right here in Sydney.

To help us assess your pre-terminated fibre requirements please fill out this questionnaire.


Benefits of 4Cabling Fibre Optic Cable

  • Meet EC, EIA, TIA & Telcordia standards
  • World class manufacturing with stringent quality control
  • All leads are supplied with a factory test report
  • 4C fibre leads are immune to electromagnetic noise
  • Simplex and Duplex configurable assemblies for LC SC ST and MTRJ patch leads

At 4Cabling we provide world-class quality fibre optic cables in OS1/2, OM1, OM3 & OM4 in many terminations and lengths and fibre couplers. No matter the size of the job, we can help with your install.

In today’s global data communication evolution optical fibre plays a major role in connecting both ends. Fibre optics cable construction are smaller and more flexible against the conventional copper-based leads, fibre optics are made of a single strand of glass, but it is stronger than steel. All of our Fibre Optic Cables are manufactured with Corning Optical Fibre. Corning glass invented and manufactured the world first low-loss fibre optics which started the telecommunication/ data high-speed transfer revolution.

Browse our extensive products online and if you have any questions, please visit our contact us page, and one of our customer service team will be in touch with you shortly.

Copyright © 2022 4Cabling Pty Ltd. All rights reserved.